UNX330

Features
  • Unicla 10-cylinder swashplate
  • Suitable for larger commercial applications with a system capacity requirement of 10-14 kW
  • Displacement: 330 cc/rev
  • Maximum continuous: 4500 rpm
  • Smooth and quiet operation with excellent performance through all rev ranges
  • Clockwise and counterclockwise rotation with no change in volumetric efficiency
  • Heavy duty impressed steel gasket and HNBR Japanese high-temperature O-ring (two-point seal)
  • Forged steel cylinder housing
  • Drop-forged 5050 aluminium pistons with synthetic PTFE heat-treated rings
  • Lip seal with high tolerance to heat and operational fatigue
  • Genuine NSK bearings throughout
86 Unx330
R134a | R513a refrigerant
Compressor Oil Mounting
UNX330 PAG56 or POE68 (600 ml) Denso 10P30C compatible
R1234yf refrigerant
Compressor Oil Mounting
UNXY330 PAG46 HD (600ml) Denso 10P30C compatible

The direct mounting system (bolt-through) on the UNX provides a total of eight mounting points (four on both the left and right sides), enabling direct compatibility with Denso 10P30C compressors. Mounting points on each side of the compressor are 104 mm and 169 mm apart.

A low-side service valve is fitted to the top.

An oil return port is not fitted.

A single-piece manifold is available.

Type 158 168 178 210 12V 24V HDC
AA-Groove        
B-Groove              
BB-Groove  
6-Groove            
8-Groove              
10-Groove        

Pulley measurements are in millimetres

Search SuperCool

Find the best HVAC&R products for your mobile, industrial or commercial needs.