1. Turn off or disconnect all power
2. Inject foam starting at the bottom of the coil and fully saturate
3. Wait 5-10 minutes to allow foam to liquify and loosen dirt, grease, and grime.
4. Condenser Coils: Light Rinse if water is available
5. Evaporator Coils: No Rinse Required
6. In food processing areas: Remove or protect all food and packaging materials. Rinse with potable water after use if contact with food or packaging materials is expected
7. All Done!

Viper Coil Cleaner is the same as Viper Heavy Duty, just in aerosol form. One aerosol can will clean up to a 5 tonne condensing unit. This product is used worldwide and recommended by manufacturers of micro-channel coils because it is safe to use on aluminium.

Viper Coil Cleaner was the first food industry compliant (NSF certified) aerosol degreaser on the market. It can be used safely by maintenance technicians in any environment. It is non-toxic, odourless, non-flammable and biodegradable. It’s the perfect cleaner for small and hard to get at coils and the narrow pin jet spray pattern ensures the foam is injected and penetrates between the fins.

• Viper Coil Cleaner is completely safe for you, the equipment and the environment.
  
  
• Many cleaners contain solvents and phosphate detergents that are toxic and have a negative ecological profile. Viper Coil Cleaner is a high performance cleaner that does not contain any hazardous ingredients.
  
  
• The aerosol injector produces rich penetrating foam allowing for extended contact time and excellent vertical hold on the coil. The foam has time to break down a wide variety of soils. Nonfoaming acid or alkaline chemicals will run directly off the coil.
  
  
• The product ratio is 92% product and 8% propellant.