UPH200 | UPHF200

Features

The Unicla 200 series Hydraulic Drive compressors are universally adaptable and can be driven by any 11-15 cc hydraulic motor with a standard SAE twin-bolt A-type mounting configuration and 5/8” nine-tooth shaft. The unit can be supplied as a complete housing and compressor kit without the hydraulic motor, or the hydraulic drive housing kit on its own without the compressor.

• Unicla 10-cylinder swashplate
• Suitable for applications with a system capacity requirement of 6-11 kW
• Displacement: 200 cc/rev
• Maximum continuous: 6000 rpm
• Smooth and quiet operation with excellent performance through all rev ranges
• Clockwise and counterclockwise rotation with no change in volumetric efficiency
• Heavy duty impressed steel gasket and HNBR Japanese high-temperature O-ring (two-point seal)
• Forged steel cylinder housing
• Drop-forged 5050 aluminium pistons with synthetic PTFE heat-treated rings
• Lip seal with high tolerance to heat and operational fatigue
• Genuine NSK bearings throughout

Mounting

The UPH and UPHF models are designed to mount to a solid base plate at four points equal to or greater than 185 x 80 mm in diameter.

Service valves

Low- and high-side service valves are fitted to the rear cap, including a high-pressure relief valve.

Oil return port

An oil return fitting – 7/16-20 UNF male flare (Part No. 42203-000160) – is supplied as standard on both UPH and UPHF models. It has a unique flow design suited to the Unicla oil separator (Part No. OS000010) and is interchangeable with the low-side service valve.

Other ports and fittings

Consistent M12 x 1.0 mm access port size. Easy interchange of blanking plugs, service valves, oil return and pressure switch fittings.

Hose ports

Clutches

Type	125	135	145	152	12V	24V
AA-Groove
B-Groove
BB-Groove
6-Groove
8-Groove
10-Groove

Pulley measurements are in millimetres

Specifications

Performance curves